One Needs to Breathe in as Much as One Breathes Out...Hopefully!

 As I wrote in a previous post, an engine breathes a tremendous amount of air!  BB's new exhaust had to be 2.5" in diameter to pass all the horsepower gas!  Well, a similar diameter is needed on the inspiration side.  Also, it's good to grab air from somewhere cold, as that air is denser and contains more Oxygen, which the Mass Airflow Sensor will happily ask for gasoline to accompany!  In any case, these are big tubes.  I also had to add the sensor to the Aluminum tube.

Below, is the new set up hanging in place with the temporary duck tape visible in the second picture.

Below, you can see the MAF installed.  That was difficult machining but fortunately, I had an endmill of the exact diameter for the sensor!  35 years of collecting tools!

In my personal opinion, this intake looks Bad Ass as installed!

Hope this breathes as well as it looks!  We'll see soon!  Happy Spring and keep having #funwithcars!